#Blow up bed how to

So, if you have a leaf blower or snow blower, you can use either as a substitute for the pump. If it can blow the air, it can be used for inflating your blow-up mattress. Overfilling will put stress on the seams, which might result in premature wear and tear as well as air leaks.” Leaf Blower “It’s better to leave your air mattress slightly underfilled than to fill it too tightly.

inflate the airbed until the desired volume is achieved, then turn the hairdryer off and close the valve.

connect the hairdryer to the inflation valve and turn it on.

The process itself is almost the same as with the vacuum method: So, take some time to practice opening and closing the valve without losing much air. Airbed valves may require an effort to close them, which puts you at risk of losing the air you’ve been trying to blow in so hard. Also, if your hairdryer starts to warm up, turn it off and let it cool down for a bit. Most of the modern hairdryers have the cooling feature, so that’s what you should use to prevent damaging your airbed. Take a paper sheet and create a cone by wrapping one side around the hairdryer and fitting the other side into the inflation valve. The outlet of your hairdryer might be too wide to fit into the inflation valve, so you may want to use an adapter - the same vacuum nozzle, for example - or create your own. However, there are a few nuances you should take into considerations: “You can do the same trick with your car vacuum cleaner - assuming it has a reverse feature - and inflate your car airbed as well.” HairdryerĪ hairdryer can also be used as an alternative method of blowing up an airbed without a pump. That’s it! Just wait until your mattress is fully inflated, remove the hose and close the valve. Thus, you won’t put too much stress on mattress seams. If your model allows for regulating the stream power, start with the lowest speed and gradually increase it.

Turn the exhaust mode on and inflate your mattress.

You might need to adjust it a bit until it’s completely tight, or purchase an adapter in the nearest hardware store.

Attach the vacuum hose to the inflation valve.

This will ensure fast and uniform inflation. Or, if you don’t have a nozzle for hard-to-reach spaces, just use the hose without one.

Replace your standard cleaning nozzle with a thin one.

Remove the dirtbag or container and run the vacuum without it for 10-15 seconds to make sure there’s no debris left in the hose. If your model has a hose attachment and an exhaust feature (or reverse mode), you’re all set. VacuumĪ vacuum is the most used unconventional method to inflate your airbed without a pump. You can use literally any home appliance that creates a directed airstream - be it your vacuum, leaf or snow blower, or even a hairdryer - and easily inflate your air mattress. If your electric pump broke down while you’re at home, don’t panic:

#Blow up bed how to

How to Blow Up an Air Mattress Without a Pump Using Home Appliances?